Program 95-tk-IP : Trunk Specifications – 3
95-tk-IP TK SPEC
0 0 0 0 0 0 0 0
Tk=Trunk No. (01-12), IP=Item Pointer
(
01-08)
Value for each Item
IP
Value
Default
Item Description
01
0-1
0=Disable
Detect Fax Signal
02
0-1
0=
Reserved
03
0-8
0=
Reserved
04
0-8
0=No
DISA & ECF Lunch Time Enable
05
0-3
3=
Reserved
06
0-9
0=
Reserved
07
0-5
0=
Reserved
08
0-5
0=
Reserved
This program permits each trunk line to be assigned different parameters.
01. Detect Fax signal
This parameter is used to enhance the feature of Fax Auto Switch so the G1E will detect the incoming fax signal and
transfer it to assigned fax SLT port.
Some company greeting messages may contain audio that falsely triggers an originating (outside) fax machine to think
it has reached a Fax machine. Since it starts to wait for a response from the fax machine before the real internal Fax
machine answers the call, it can time out. As a result the external sending fax machine disconnects the call before it
has been properly routed inside the G1E and answered by the Fax machine connected behind the G1E. This
parameter was created to overcome such a situation.
Definition of parameter:
IP
Value
Value Description
95-tk-01
0
The trunk won’t detect the fax signal.
95-tk-01
1
The trunk will detect the FAX calling tone during the company greeting and route the
FAX call automatically
95-tk-01
2
The trunk will delay the company greeting for 5 seconds in order to not false trip the
external machine into attempting to send.
95-tk-01
3
The trunk will delay the company greeting for 6 seconds in order to not false trip the
external machine into attempting to send.
..
…..
95-tk-01
9
The trunk will delay the company greeting for 12 seconds in order to not false trip the
external machine into attempting to send.
If the programmed trunk detects the FAX calling tone, the system will transfer this fax call to the assigned FAX
extension automatically (refer to Program Mode 43-CN-02=T). If the programmed trunk does not detect the FAX
calling tone during the above timer, the system will then play the company greeting for a normal voice call.
Other programming modes relate this setting:
a. 43-CN-02 = T (Fax port) => press [MSG] ---- (SLT Port)
b. 95-TK-01 = 0/1 => disable/enable Fax Tone Detection
c. 35-TK-04= 3 Enable DISA feature
d. 46-ST-08= 1 SLT Ring Cadence Settings
e. 05-01-04= 0 DISA answer delay time
Summary of Contents for G1E Plus
