TransTel Communications G1E Plus User Manual Download Page 116

Page: 116 / 144

Program 77-Num : LCR – Modifying Table

77-Num-IP Mo Tab
00 dddddddddd

Num = Number (01~99)
Value for each item

Value

Default

Item Description

01-02

00~10

Deleted Digit Length

03-12

0~9, *,#, -, d, T, p

dddddddddd

Added Digits

General:

This program designs the rules for changing the dialed number to the routed number.

Description:

The system will delete the first nn digits (if required) and then add the assigned digits in front of the dialed numbers.

Up to 10 digits can be assigned to be inserted.

The added digits can be 0~9, *, #, p, T.

‘d’ is the wildcard. (DND/CN)

‘-‘ is no digit.

‘p’ is the pause character. (HOLD)

‘T’ = means to chain to next modifying table with current one for long digit strings. (MSG)

Related system Programming: 05-13-07. 05-13-08, 75, 76, 77, 78-st-01, 78-st-02

Summary of Contents for G1E Plus

















































































































































Search results

Summary of Contents for G1E Plus

Reviews:

Related manuals for G1E Plus

Brands by name

Popular brands

TransTel Communications G1E Plus, User Manual

Search results

Summary of Contents for G1E Plus

Reviews:

Related manuals for G1E Plus

Brands by name

Popular brands