TransTel Communications G1E Plus, User Manual

Page: 91 / 144

be placed on hold by one of the extensions and retrieved from the other or can be transferred to other extensions by
the normal method. The Station COS of the digital phone will be allocated to the SLT automatically.
3) Type 7 allows an SLT port to be used as an additional MOH input allowing tenanted systems to have different
messages played to different trunk groups during Call Hold. Once an SLT port is set to MOH then in Mode 41-slt-04
the port can be allocated to all or individual trunks groups as a hold source.
4) Type – allows the SLT port to be used for an External Paging Port. Both SLT Music Port and SLT Paging port
MUST have a line isolator unit installed.
5) Type 8
can be assigned to an analog port to enable the system to send DTMF tones identifying a call forwarded
call’s originating station. A voice Mail port will receive DTMF tones from call forwarded stations identifying the mail box
to which the call is intended. The mail box number must be the same as the station number for this parameter to work
although Mode 05-10 can insert leading digits before the station number is sent to the Voice Mail and is also able to
insert pauses before or during the string. There is also an Enhanced Protocol to provide more information to the Voice
Mail unit, see Mode 05-10 for descriptions of the protocols available.
6) Type 9 allows the ISDN Basic Rate to be made an “S” bus
51~52: the 1st Internal ISDN port of the 1st G1E-SIU card, and the default extension number is 141~142
53~54: the 2nd Internal ISDN port of the st G1E-SIU card, and the default extension number is 143~144
55~56: the 3rd Internal ISDN port of the 1st G1E-SIU card, and the default extension number is 145~146
51~56: Virtual Station Port, and the default extension number is 141~146.
(Virtual station port pool same port with SIU S-interface)
7) Type T is Fax port that will receive calls that transferred from trunks that are set to be Fax trunks in Mode 95-Tk-01
if a Fax CNG tone is present when DISA answers the incoming call. One fax station port is allowed.
The way to set up Fax Tone detection is below:
1. Enable DISA feature to answer the call (Mode 35-TK-04 = 3)
2. Enable detect fax tone feature by trunk (Mode 95-TK-01= 1)
3. Set Fax machine number (Mode 43-port-02= T, Pressing [MSG] for T)
03. Flexible DSS Key Group Assignments for DSS Console
This parameter assigns stations to be one of two flexible DSS console key groups.
IP Value Value Description
43-pn-03 0 Disable
43-pn-03 1-2 DSS Key Group 1 to 2
See Mode 08: Flexible DSS console key group assignment for DSS Console.
04. Reserved
05. Voice Mail Box Capacity-Virtual Mail Box
This parameter decides the total mail box message units which can be used by this extension and creates Virtual
Mailboxes. The G1E can have 6 virtual mailboxes on ports 51 to 56. These ports are shared with the ISDN “S” bus.
IP Value Value Description
43-pn-05 00 No mailbox
43-pn-05 01 5 voice units
43-pn-05 02 10 voice units
43-pn-05 03 15 voice units
43-pn-05 04 20 voice units
~ ~
43-pn-05 50 250 voice units