TransTel Communications G1E Plus, User Manual

Page: 38 / 144

Program 05-10-IP : System Timing Parameters – 10
05-10-IP SYS PAR
d d d d d d d d IP =Item Pointer (01-08)
Value for each Item
IP Value Default Item Description
01 0-9,*,#,p,d d= No Digit Leading Digit 1 For Voice Mail Forwarding
02 0-9,*,#,p,d d= No Digit Leading Digit 2 For Voice Mail Forwarding
03 0-9,*,#,p,d d= No Digit Leading Digit 3 For Voice Mail Forwarding
04 0-9,*,#,p,d d= No Digit Leading Digit 4 For Voice Mail Forwarding
05 0-9,*,#,p,d d= No Digit Leading Digit 5 For Voice Mail Forwarding
06 0-9,*,#,p,d d= No Digit Leading Digit 6 For Voice Mail Forwarding
07 0-9,*,#,p,d d= No Digit Leading Digit 7 For Voice Mail Forwarding
08 0-9,*,#,p,d d= No Digit Leading Digit 8 For Voice Mail Forwarding
Description:
This parameter allows the system to insert digits before the call forwarded station number when the call forward is
received by the voice mail port if Standard Protocol is selected. If the station numbering is only 2 or 3 digits the system
will insert additional digits if the Voice Mail requires more. The last digits of the voice mail box number will still have to
be the same as the station numbering for correct recognition. The HOLD key can be used to insert a pause in the
DTMF tone sending and will display as a (p). The DND key is no digits sent and is shown as (d).
The possible value for each leading digit is 0 to 9, *, #, Pause (enter by pressing HOLD key) and No Digit (enter by
pressing DND key)
Example:
The system is set to 2 digit numbering but the voice mail requires 4 digits. The voice mail also requires a pause
between answering the call and the tones being sent. Set this parameter to the following
05-10-IP SYS PAR
p 1 1 d d d d d
When the call forwarded station 34 is answered by the voice mail port after the pause time the digits 1134 will be sent
to the port by the system. If station 34's voice mail box is 1134 then the mailbox number 1134 will be automatically
opened by the tones.
There are 2 different Voice Mail Protocols available in the TRANSTEL series depending on the setting in Mode 05-12-
05. If this mode is set to 0 then the Protocol will be the leading digits entered in this Mode plus the Station Number of
the forwarded station. If Mode 05-12-05 is set to 1 then the Enhanced Protocol shown on the following page will be
used.
Enhanced Protocol
Voice Mail System Leading Digit Format
1+ extension number = CFWD All Calls
2+ extension number = CFWD Busy
3+ extension number = CFWD No Answer
4+ extension number = Direct Call to Voice Mail (Station)
5+ extension number = Call Record
6+ extension number = Recall to Voice Mail
7+ CO trunk number
= Incoming CO Call