TransTel Communications G1E Plus User Manual Download Page 80

Page: 80 / 144

08. Inward Line Ringing Method Assignment (Night)

As described in Program 02-tk-IP, there are four ringing methods plus a Private line setting: All settings in item 08 are
the same as item 07.

Value

Value Description

35-tk-08

Night - COMMON AUDIBLE

35-tk-08

Night - LINEAR

35-tk-08

Night - CIRCULAR

35-tk-08

Night - HUNT

35-tk-08

Night - PRIVATE

Trunk Name Entry

1. Enter system programming Mode 35.
2. Pressing

[MIC]

{Change}

to enter the Name mode.

3. Input the name for the related trunk by the following function keys.

Key
Pad

Depress
1 time

Depress
2 times

Depress
3 times

Depress
4 Times

Depress
5 Times

Space

;

(

)

4. Press

{SAVE}

to store the data.

5. The next trunk port will be appeared to be set its names.

Summary of Contents for G1E Plus

















































































































































Search results

Summary of Contents for G1E Plus

Reviews:

Related manuals for G1E Plus

Brands by name

Popular brands

TransTel Communications G1E Plus, User Manual

Search results

Summary of Contents for G1E Plus

Reviews:

Related manuals for G1E Plus

Brands by name

Popular brands