3000A SERIES CALIBRATION MANUAL
TRANSMILLE LTD. Version 3 : Jun 2014
Page 45
Active Ω
To calibrate the Active Ω parameter, complete the procedure as follows:
The Active Ω output of the 3000A series is available as a 2 Wire output only,
however the output can be varied to any output
1.
Select
CALIBRATE
using the soft key
2. Use the ‘Digital Control’ or the ‘Arrow Keys’ to highlight the required parameter ‘4
Wire Ω’ and then press
SELECT
soft key
3. Use the ‘Digital Control’ or the ‘Arrow Keys’ to highlight the required range e.g.
’10 Ω ’ and then press
SELECT
soft key
