e)
The equipment has been dropped or damaged.
f)
The equipment has obvious signs of damage.
DO NOT LEAVE THIS EQUIPMENT IN AN
ENVIRONMENT WHERE TEMPERATURES EX- CEED 60 °C (140 °F); IT MAY DAMAGE THE
EQUIPMENT.
Symbols
The following symbols will appear in this manual to indicate different safety precaution:
Hazardous voltages are present. To reduce the risk of electric shock and danger to
personal health, follow the instructions.
There is a risk of personal injury and equipment damage. Follow the instructions.
Hot surface. Avoid contact. Surfaces are hot and may cause personal injury if
touched.
Safety Statements
DANGER:
Electrical current from power, telephone, and communication cables is hazardous. To
avoid a shock hazard:
•
Do not connect or disconnect any cables or perform installation, maintenance, or
reconfiguration of this product during an electrical storm.
•
Connect all power cords to a properly wired and grounded electrical outlet.
•
Connect to properly wired outlets any equipment that will be attached to this product.
•
When possible, use one hand only to connect or disconnect signal cables.
•
Never turn on any equipment when there is evidence of fire, water, or structural damage.
•
Disconnect the attached power cords, telecommunications systems, networks, and
modems before you open the device covers, unless instructed otherwise in the installation
and configuration procedures.
•
Connect and disconnect cables as described in the following table when installing, moving,
or opening covers on this product or attached devices.
To Connect:
To Disconnect:
1. Turn everything OFF.
1.
Turn everything OFF.
2.
First, attach all cables to devices.
2.
First, remove power cords from outlet.
3.
Attach signal cables to connectors. 3.
Remove signal cables from connectors.
4.
Attach power cords to outlet.
4.
Remove all cables from devices.
5.
Turn device ON.
Summary of Contents for SSR-4N108L
Page 1: ...JBOD SSR 4N108L User Manual ...
Page 16: ...System Architecture ...
Page 61: ...Signal Cable Routing ...
