Further Safety Information
Be sure to read all caution and danger statements in this documentation before performing
the instructions. Read any additional safety information that comes with your JBOD or
optional de- vice before you install the device.
Safety Precautions
For your protection, observe the following safety precautions when setting up your equipment:
Follow all cautions and instructions marked on the equipment.
Ensure that the voltage and frequency of your power source match the voltage and
frequency
inscribed on the equipment’s electrical rating label.
Never push objects of any kind through openings in the equipment. Dangerous
voltages may be present.
Conductive foreign objects could produce a short circuit that could cause fire, electric
shock, or
damage to your equipment.
Safety
Instructions
1.
Please read these safety instructions carefully.
2.
Please keep this Manual for later reference.
3.
Please disconnect this equipment from AC outlet before cleaning.
Don’t use liquid or sprayed
detergent for cleaning. Use moist sheet or cloth for cleaning.
4.
For pluggable equipment, the socket-outlet must be installed near the equipment and must be
easily accessible.
5.
Please keep this equipment from humidity.
6.
Place this equipment on a safe reliable surface when installing. A drop or fall could cause injury.
7.
Enclosure openings are for air circulation and protect the equipment from overheating. DO NOT
COVER THE OPENINGS.
8.
Make sure the voltage of the power source matches rated voltages.
9.
Place the power cord so that it won’t be stepped on or tripped over. Do not place anything on top
of the power cord.
10.
All cautions and warnings on the equipment should be noted.
11.
If the equipment is not used for a long time, disconnect the equipment from outlet to avoid dam-
age to the system by transient voltages.
12.
Do not spill liquids onto equipment; this may cause fire or electrical shock.
13.
Never open the equipment. For safety reasons, the equipment should only be opened by qualified
service personnel.
14.
If any of the following situations arises, have the equipment checked by qualified service:
a)
The power cord or plug is damaged.
b)
Liquid seeped into the equipment.
c)
The equipment has been exposed to moisture.
d)
The equipment does not work well or operation does not match behavior describe in
user’s
manual.
Summary of Contents for SSR-4N108L
Page 1: ...JBOD SSR 4N108L User Manual ...
Page 16: ...System Architecture ...
Page 61: ...Signal Cable Routing ...