TRADEDX SSR-4N108L, User Manual

Page: 21 / 85

Hardware Installation
Introduction
The procedures in this section apply to the SSR-4N108L JBOD model
Safety Measures
Computer components and electronic circuit boards can be damaged by discharges
of static electricity. Working on computers that are still connected to a power supply
can be extremely dangerous. Follow the simple guidelines below to avoid damage to
your computer or injury to yourself.

Always disconnect the computer from the power outlet whenever you are
working inside the computer case.

If possible, wear a grounded wrist strap when you are working inside the computer
case. Alternatively, discharge any static electricity by touching the bare metal
chassis of the computer case, or the bare metal body of any other grounded
appliance.

Hold electronic circuit boards by the edges only. Do not touch the components on the
board unless it is necessary to do so. Do not flex or stress the circuit board.

Leave all components inside the static-proof packaging until you are ready to use
the component for the installation.