TRADEDX SSR-4N108L, User Manual

Page: 69 / 85

CMM Image File Naming
File naming information: SHM<Major><Minor><SKU>.ima
SHM: Identifiers for specified product.

<Major>: Two characters for major version number.

<Minor>: Two characters for minor version number.

<SKU>: Single character for SKU identifier, typical
“A”, “B”, ….
Example:
SHM0101A.ima: Image file for FW version 1.01.
Updating CMM FW Using Linux
1. Log into Linux.
2. Open the terminal.
3. Create a temporary folder
/cmm
.
4. Copy the Yafuflash utility and CMM FW images to the /cmm folder.
5. Since CMM supports dual-images, additional elements -mse <image selector> are
required.
-mse 1: Image 1 selected to be flashed,
-mse 2: Image 2 selected to be flashed,
6. Image 1 (first flash part) is the primary boot and active image after JBOD reset
or
power on, the default flashed target is inactive (backup) image if without “-
mse” option. So specified the selec- tor is recommended.
7. Execute the following command to start the interactive CMM FW flash process.
Command:

Normal update mode (with interactive messages):
#./ Yafuflash –nw –ip <ip address> -u <usernam> –p <password> -mse < selector>
<FW filename>

Command for quiet update mode (without interactive messages):
#./ Yafuflash –nw –ip <ip address> -u <usernam> –p <password> -fb -mse <
selector> <FW filename>
or
#./ Yafuflash –nw –ip <ip address> -u <usernam> –p <password> -ipc -idi -iml -isi
-ibv-mse < selector> <FW filename>