HDD Backplane
Removing a HDD Backplane
Follow these steps to remove an HDD backplane:
1.
Power off the JBOD and detach all of the power cords from the power supply.
2.
Open an HDD drawer. See
“Opening an HDD Drawer” on page 13.
3.
Remove the HDDs. See
“Removing a 3.5” HDD” on page 30.
4.
Remove the expander boards. See
“Removing an Expander Board” on page 31.
5.
Disconnect the cables from the HDD backplanes.
6.
Remove an HDD drawer. See
“Removing an HDD Drawer” on page 15.
7.
Turn an HDD drawer over and place an HDD drawer on a clean work space.
8.
Remove the inner rail. See
“Removing an Inner Rail” on page 48.
9.
Remove a rail bracket. See
“Removing a Rail Bracket” on page 50.
10.
Disconnect the FFC cable from the HDD backplanes.
11.
Remove the screws securing a strength panel to an HDD drawer.
12.
Remove a strength panel.
13.
Remove an HDD backplane.
Summary of Contents for SSR-4N108L
Page 1: ...JBOD SSR 4N108L User Manual ...
Page 16: ...System Architecture ...
Page 61: ...Signal Cable Routing ...
