Power Distribution Board (PDB)
Removing a Power Distribution Board
Follow these steps to remove a PDB:
1.
Power off the JBOD and detach all of the power cords from the power supply.
2.
Open an HDD drawer. See
“Opening an HDD Drawer” on page 13.
3.
Remove a rear top cover. See
“Removing a Rear Top Cover” on page 24.
4.
Remove a PDB cover. See
“Removing a Power Distribution Board Cover
(PDB
Cover)” on page 43.
5.
Disconnect the cables from a PDB.
6.
Remove a screw securing a PDB to the chassis.
7.
Remove a PDB.
Installing a Power Distribution Board
Follow these steps to install a PDB:
1.
Align the holes on the PDB with the standoffs on the chassis.
2.
Slide a PDB to lock in place.
3.
Secure a PDB to the chassis with a screw.
Summary of Contents for SSR-4N108L
Page 1: ...JBOD SSR 4N108L User Manual ...
Page 16: ...System Architecture ...
Page 61: ...Signal Cable Routing ...
