Cable Chain Module
Removing a Cable Chain Module
Follow these steps to remove a cable chain module:
1.
Power off the JBOD and detach all of the power cords from the power supply.
2.
Open an HDD drawer. See
“Opening an HDD Drawer” on page 13.
3.
Remove a cable cover. See
“Removing a Cable Cover” on page 35.
4.
Remove an HDD drawer. See
“Removing an HDD Drawer” on page 15.
5.
Remove the top covers. See
“Removing a Front Top Cover” on page 26
and
“Removing a Rear Top Cover” on page 24.
6.
Remove a screw securing a front cable chain bracket to the chassis.
7.
Slide a cable chain module to unlock and remove.
Installing a Cable Chain Module
Follow these steps to install a cable chain module:
1.
Align the holes on a front cable chain bracket with the standoffs on the chassis.
2.
Slide a cable chain module to lock on the chassis.
3.
Secure a cable chain module to the chassis with a screw.
Summary of Contents for SSR-4N108L
Page 1: ...JBOD SSR 4N108L User Manual ...
Page 16: ...System Architecture ...
Page 61: ...Signal Cable Routing ...
