Example:
1.
Specified Image-1 (active) to be flashed.
=============================================================================
Firmware Details
=============================================================================
RomImage
Image 1
Image 2
ModuleName
Description
Version
Version
Version
1.
boot
BootLoader
2.3.000000
2.3.000000
2.3.000000
2.
conf
ConfigParams 2.3.000000
2.3.000000
2.3.000000
3.
bkupconf
2.3.000000
2.3.000000
2.3.000000
4.
root
Root
2.1.000000
2.1.000000
2.1.000000
5.
osimage
Linux OS
2.1.000000
2.1.000000
2.1.000000
6.
www
Web Pages
2.1.000000
2.1.000000
2.1.000000
7.
ast2500e
1.0.000000
1.0.000000
1.0.99
Existing Image
and Current Image are Same
So,Type (Y/y) to do Full Firmware Upgrade or (N/n) to exit
Enter your Option : y
****************************************************************************
WARNING!
FIRMWARE UPGRADE MUST NOT BE INTERRUPTED ONCE IT IS STARTED.
PLEASE DO NOT USE THIS FLASH TOOL FROM THE REDIRECTION CONSOLE.
****************************************************************************
Uploading Firmware Image :
100%...
done
Skipping [boot] Module ....
[root@localhost]# ./Yafuflash -nw -ip 10.67.222.129 -u admin -p admin -mse 1 SH-
M0100A.ima
INFO: Yafu INI Configuration File not found... Default options will not be ap-
plied...
Creating IPMI session via network with address 10.67.222.129...Done
-------------------------------------------------
YAFUFlash - Firmware Upgrade Utility (Version 4.89.0)
-------------------------------------------------
(C)Copyright 2016, American Megatrends Inc.
Image To be updated is (Image-1)
Summary of Contents for SSR-4N108L
Page 1: ...JBOD SSR 4N108L User Manual ...
Page 16: ...System Architecture ...
Page 61: ...Signal Cable Routing ...
