Toyota Matrix 2012 Owner'S Manual Download Page 419

Page: 419 / 481

W
h

en
t

ub
le

ise
s

439

5-2. Steps to take in an emergency

If the shift lever cannot be shifted from P (automatic transmission)

If the shift lever cannot be shifted with your foot on the brake, there

may be a problem with the shift lock system (a system to prevent

accidental operation of the shift lever). Have the vehicle inspected by

your Toyota dealer.

The following steps may be used as an emergency measure to

ensure that the shift lever can be shifted.

Set the parking brake.

Turn the engine switch to the “ACC” position.

Depress the brake pedal.

Pry the cover up with a flat-
head screwdriver or equiva-
lent.

Press the shift lock override
button.

The shift lever can be shifted
while the button is pressed.

STEP

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands

Toyota Matrix 2012, Owner'S Manual

Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands