Toyota Matrix 2012 Owner'S Manual Download Page 211

Page: 211 / 481

229

3-2. Using the audio system

Inte

rior fe

atures

Selecting and scanning a folder

■

Selecting a folder

Press “

∧

” or “

∨

” on

to select the desired folder.

■

Returning to the first file of the first folder

Press and hold “

∨

” on

until you hear a beep.

■

Scanning the first file of all the folders

Press and hold

until you hear a beep.

The first ten seconds of the first file in each folder will be played.

When the desired folder is reached, press

again.

Selecting and scanning files

■

Selecting a file

Turn

or press “

∧

” or “

∨

” on

to select the desired file.

■

Scanning the files in a folder

Press .

The first ten seconds of each file will be played.

To cancel, press

again.

When the desired file is reached, press

again.

Playing and pausing files

Press

STEP

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands

Toyota Matrix 2012, Owner'S Manual

Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands