Toyota Matrix 2012 Owner'S Manual Download Page 293

Page: 293 / 481

311

3-7. Other interior features

Inte

rior fe

atures

Cigarette lighter

∗

■

The cigarette lighter can be used when

The engine switch is in the “ACC” or “ON” position.

CAUTION

■

To avoid burns or fires

●

Do not touch the metal parts of the cigarette lighter.

●

Do not hold the cigarette lighter down. It could overheat and cause a fire.

●

Do not insert anything other than the cigarette lighter into the outlet.

Push the cigarette lighter
down.

The cigarette lighter will pop up
when it is ready for use.

∗

: If equipped

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands

Toyota Matrix 2012, Owner'S Manual

Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands