Toyota Matrix 2012 Owner'S Manual Download Page 183

Page: 183 / 481

201

3-2. Using the audio system

Inte

rior fe

atures

■

Satellite Radio

An XM

Satellite Radio is a tuner designed exclusively to receive broadcasts

provided under a separate subscription. Availability is limited to the 48 con-
tiguous states and 10 Canadian provinces.

●

subscriptions

For detailed information about XM

Satellite Radio or to subscribe:

U.S.A.

⎯

Visit on the web at www.xmradio.com or call 1-800-967-2346.
Canada

⎯

Visit on the web at www.xmradio.ca or call 1-877-438-9677.

●

Radio ID

You will need the radio ID when activating XM

service or reporting a

problem. Select “CH000” using

, and the receiver's 8-character ID

number will appear.

●

Satellite tuner
The tuner supports only Audio Services (Music and Talk) and the accom-
panying Text Information of XM

Satellite Radio.

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands

Toyota Matrix 2012, Owner'S Manual

Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands