Toyota Matrix 2012 Owner'S Manual Download Page 113

Page: 113 / 481

129

2-1. Driving procedures

en drivin

Turn signal lever

■

Turn signals can be operated when

The engine switch is in the “ON” position.

■

If the indicators flash faster than usual

Check that a light bulb in the front or rear turn signal lights has not burned
out.

Right turn

Left turn

Move and hold the lever
partway to signal a lane
change.

The right hand signal will flash
until you release the lever.

Move and hold the lever
partway to signal a lane
change.

The left hand signal will flash
until you release the lever.

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands

Toyota Matrix 2012, Owner'S Manual

Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands