Toyota Matrix 2012 Owner'S Manual Download Page 105

Page: 105 / 481

121

2-1. Driving procedures

en drivin

NOTICE

■

To prevent battery discharge

Do not leave the key in the “ACC” or “ON” position for long periods if the
engine is not running.

■

When starting the engine

●

2.4 L 4-cylinder (2AZ-FE) engine

⎯

Do not crank for more than 30 sec-

onds at a time. This may overheat the starter and wiring systems.

●

Do not race a cold engine.

●

If the engine becomes difficult to start or stalls frequently, have the engine
checked immediately.

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands

Toyota Matrix 2012, Owner'S Manual

Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands