manualshive.com logo in svg

Toyota Matrix 2012, Owner'S Manual, Page: 227 / 481

Share
Download
Toyota Matrix 2012 Owner'S Manual Download Page 227

245

3-3. Using the Bluetooth

®

 audio system

3

Inte

rior fe

atures

■

When transferring ownership of the vehicle

Be sure to initialize the system to prevent personal data from being improp-
erly accessed. (

→

P. 287)

■

About Bluetooth

®

■

Compatible models

●

Bluetooth

®

 specifications:

Ver. 1.2

●

Following Profiles:

• A2DP (Advanced Audio Distribution Profile) Ver. 1.0
• AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (Ver.

1.3 or higher recommended)

Portable players must correspond to the above specifications in order to be
connected to the Bluetooth

®

 audio system. However, please note that some

functions may be limited depending on the type of portable player.

■

Certification for the Bluetooth

®

 audio system

FCC ID: L2C0045TR
IC ID:

3432A-0045TR

MADE IN MEXICO

This device complies with Part 15 of the FCC Rules and RSS-210 Rules.
Operation is subject to the following two conditions; (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

Bluetooth is a registered trademark of
Bluetooth SIG. Inc.

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Reviews:

No comments