Toyota Matrix 2012 Owner'S Manual Download Page 181

Page: 181 / 481

199

3-2. Using the audio system

Inte

rior fe

atures

Satellite Radio (type B only)

■

Receiving XM

Satellite Radio

Press .

The display changes as follows each time

is pressed.

→

Turn

to select the desired channel from all categories or

press “

∧

” or “

∨

” on

to select the desired channel in the

current category.

■

Setting XM

Satellite Radio channel presets

Select the desired channel. Press and hold a button (one of

)

until you hear a beep.

■

Changing the channel category

Press “

∧

” or “

∨

” on

■

Scanning XM

Satellite Radio channels

●

Scanning channels in the current category

Press .

When the desired channel is reached, press
again.

●

Scanning preset channels

Press and hold

until you hear a beep.

When the desired channel is reached, press
again.

STEP

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Search results

Summary of Contents for Matrix 2012

Reviews:

Toyota Matrix 2012, Owner'S Manual, Page: 181 / 481

Search results

Summary of Contents for Matrix 2012

Reviews: