Toyota Matrix 2012 Owner'S Manual Download Page 410

Page: 410 / 481

430

5-2. Steps to take in an emergency

Installing the tire

Remove any dirt or foreign mat-
ter from the wheel contact sur-
face.

If foreign matter is on the wheel
contact surface, the wheel nuts
may loosen while the vehicle is
in motion, and the tire may
come off the vehicle.

Install the tire and loosely tighten each wheel nut by hand by
approximately the same amount.

Replacing a steel wheel with a compact spare tire

Tighten the nuts until the tapered
portion comes into loose contact
with the disc wheel seat.

Replacing an aluminum wheel with a compact spare tire

Tighten the nuts until the tapered
portion comes into loose contact
with the disc wheel seat.

STEP

Tapered portion

Disc wheel

seat

Tapered portion

Disc wheel

seat

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands

Toyota Matrix 2012, Owner'S Manual

Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands