Toyota Matrix 2012 Owner'S Manual Download Page 236

Page: 236 / 481

254

3-3. Using the Bluetooth

audio system

Fast-forwarding and reversing tracks

Press and hold “

∧

” or “

∨

” on

Switching the display

Press .

Each time

is pressed, the display changes in the following order:

Track title

→

Track title/Artist name

→

Track title/Album name

→

Track

title/Elapsed time

Using the steering wheel audio switches

→

P. 241

■

Bluetooth

audio system functions

Depending on the portable player that is connected to the system, certain
functions may not be available.

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Search results

Summary of Contents for Matrix 2012

Reviews:

Toyota Matrix 2012, Owner'S Manual, Page: 236 / 481

Search results

Summary of Contents for Matrix 2012

Reviews: