manualshive.com logo in svg

Toyota Matrix 2012, Owner'S Manual, Page: 187 / 481

Share
Download
Toyota Matrix 2012 Owner'S Manual Download Page 187

205

3-2. Using the audio system

3

Inte

rior fe

atures

Loading CDs

■

Loading a CD

Insert a CD.

Ejecting CDs

■

Ejecting a CD

Press 

 and remove the CD.

Selecting a track

Press “

∧

” to move up or “

∨

” to move down using 

 until the desired

track number is displayed.

Fast-forwarding and reversing tracks

Type A

Press 

 (reverse) or 

 

(fast-forward).

Type B

Press and hold “

∧

” or “

∨

” on 

.

Scanning tracks

Press .

The first ten seconds of each track will be played.

To cancel, press 

 again.

Press 

 again when the desired track is reached.

STEP

1

STEP

2

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Reviews:

No comments