Toyota Matrix 2012 Owner'S Manual Download Page 195

Page: 195 / 481

213

3-2. Using the audio system

Inte

rior fe

atures

Fast-forwarding and reversing files

Type A

Press

(reverse) or

(fast-forward).

Type B

Press and hold “

∧

” or “

∨

” on

Playing and pausing files (type B only)

Press

Repeat play

■

Repeating a file

Press

(RPT) or

(RPT).

To cancel, press the button once more (without a CD changer), or twice
more (with a CD changer).

■

Repeating all of the files in a folder

Type A

Press and hold

(RPT) until you hear a beep.

To cancel, press the button again.

Type B

Press

(RPT) twice.

To cancel, press the button once more (without a CD changer), or twice
more (with a CD changer).

■

Repeating all of the files on a disc (type B with a CD changer)

Press

(RPT) three times.

To cancel, press the same button again.

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands

Toyota Matrix 2012, Owner'S Manual

Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands