Toyota Matrix 2012 Owner'S Manual Download Page 169

Page: 169 / 481

187

3-1. Using the air conditioning system and defogger

Inte

rior fe

atures

Adjusting the settings

■

Adjusting the temperature setting (heater)

Turn the temperature control dial clockwise to increase the temper-
ature.

■

Adjusting the temperature setting (air conditioning system)

Turn the temperature control dial clockwise (warm) or counter-
clockwise (cool).

is not pressed, the system will blow ambient temperature air or

heated air.

■

Adjusting the fan speed

Turn the fan speed control dial clockwise (increase) or counter-
clockwise (decrease).

Set the dial to “0” to turn the fan off.

■

Selecting the air outlets

Set the air outlet selection dial to an appropriate position.

The positions between the air outlet selections shown below can also be
selected for more detailed adjustment.

Air flows to the upper body.

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands

Toyota Matrix 2012, Owner'S Manual

Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands