Toyota Matrix 2012 Owner'S Manual Download Page 385

Page: 385 / 481

W
h

en
t

ub
le

ise
s

405

5-1. Essential information

If your vehicle needs to be towed

Before towing

The following may indicate a problem with your transmission. Contact
your Toyota dealer before towing.

●

The engine is running, but the vehicle will not move.

●

The vehicle makes an abnormal sound.

If towing is necessary, we recommend having your vehicle towed by

your Toyota dealer or a commercial towing service, using a lift-type

truck or a flat bed truck.

Use a safety chain system for all towing, and abide by all state/pro-

vincial and local laws.

2WD models: If towing your vehicle with a wheel-lift type truck from

the front, the vehicle's rear wheels and axles must be in good condi-

tions. (

→

P. 407, 410)

If they are damaged, use a towing dolly or flat bed truck.

AWD models: If towing your vehicle with a wheel-lift type truck, use a

towing dolly. (

→

P. 407, 410)

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands

Toyota Matrix 2012, Owner'S Manual

Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands