Toyota Matrix 2012 Owner'S Manual Download Page 194

Page: 194 / 481

212

3-2. Using the audio system

Loading and ejecting MP3 and WMA discs

→

P. 205

Selecting MP3 and WMA discs (with a CD changer)

→

P. 206

Selecting and scanning a folder

■

Selecting folders one at a time

Press “

∧

” or “

∨

” on

to select the desired folder.

■

Scanning the first file of all the folders

Press and hold

until you hear a beep.

The first ten seconds of the first file in each folder will be played.

When the desired folder is reached, press

again.

■

Returning to the first folder

Press and hold “

∨

” on

until you hear a beep.

Selecting and scanning files

■

Selecting one file at a time

Turn

or press “

∧

” or “

∨

” on

to select the desired file.

■

Selecting the desired file by cueing the files in the folder

Press .

When the desired file is reached, press

once again.

STEP

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands

Toyota Matrix 2012, Owner'S Manual

Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands