Toyota Matrix 2012 Owner'S Manual Download Page 344

Page: 344 / 481

363

4-3. Do-it-yourself maintenance

Mainten

ance an

d ca

Washer fluid

For vehicles sold in U.S.A.

If any washer does not work, the washer tank may be empty.

Open the lid.

Add washer fluid.

For vehicles sold in Canada

If any washer does not work or the low windshield washer fluid level
warning light comes on, the washer tank may be empty. Add washer
fluid.

NOTICE

■

When recharging the battery

Never recharge the battery while the engine is running. Also, be sure all
accessories are turned off.

STEP

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands

Toyota Matrix 2012, Owner'S Manual

Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands