Toyota Matrix 2012 Owner'S Manual Download Page 189

Page: 189 / 481

207

3-2. Using the audio system

Inte

rior fe

atures

Random playback

■

Current CD

Press

(RAND) or

(RDM).

Songs are played in random order.

To cancel, press the button once more (without a CD changer), or twice
more (with a CD changer).

■

All CDs (with a CD changer)

Type A

Press and hold

(RAND) until you hear a beep.

Tracks on all loaded CDs are played in a random order.

To cancel, press the button again.

Type B

Press

(RDM)

twice.

Tracks on all loaded CDs are played in random order.

To cancel, press the button again.

Switching the display

Press .

Each time

is pressed, the display changes in the following order:

Type A: Track no./Elapsed time

→

CD title

→

Track name.

Type B: Track title

→

Track name/Artist name

→

Track name/Elapsed

time.

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Search results

Summary of Contents for Matrix 2012

Reviews:

Toyota Matrix 2012, Owner'S Manual, Page: 189 / 481

Search results

Summary of Contents for Matrix 2012

Reviews: