Toyota Matrix 2012 Owner'S Manual Download Page 123

Page: 123 / 481

139

2-3. Operating the lights and wipers

en drivin

Turning on the high beam headlights

With the headlights on, push
the lever forward to turn on the
high beams.

Pull the lever back to the center
position to turn the high beams
off.

Pull the lever toward you to
turn on the high beams.

Release the lever to turn them off.
You can flash the high beams
with the headlights on or off.

Type B

The daytime run-
ning lights turn on.

The side marker,
parking, tail, license
plate, daytime run-
ning lights and
instrument panel
lights turn on.

The headlights and
all lights listed above
(except daytime run-
ning lights) turn on.

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands

Toyota Matrix 2012, Owner'S Manual

Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands