manualshive.com logo in svg

Toyota Matrix 2012, Owner'S Manual

The Toyota Matrix 2012 Owner's Manual is available for free download at manualshive.com. This comprehensive manual provides detailed information on maintenance, operation, and troubleshooting for your Toyota Matrix 2012. Take full advantage of this invaluable resource to get the most out of your vehicle.

Share
Download
background image

317

3-7. Other interior features

3

Inte

rior fe

atures

Floor mat

CAUTION

Observe the following precautions. 
Failure to do so may cause the driver's floor mat to slip, possibly interfering
with the pedals while driving. An unexpectedly high speed may result or it may
become difficult to stop the vehicle, leading to a serious accident.

■

When installing the driver's floor mat 

●

Do not use floor mats designed for other models or different model year
vehicles, even if they are Toyota Genuine floor mats.

●

Only use floor mats designed for the driver's seat.

●

Always install the floor mat securely using the retaining hooks (clips) pro-
vided.

●

Do not use two or more floor mats on top of each other.

●

Do not place the floor mat bottom-side up or upside-down.

■

Before driving

Use only floor mats designed specifically for vehicles of the same
model and model year as your vehicle. Fix them securely in place
onto the carpet.

Fix the floor mat in place using
the retaining hooks (clips) pro-
vided.

The shape of the retaining
hooks (clips) and the fixing
procedure of the floor mat for
your vehicle may differ from
those shown in the illustration.
For details, refer to the floor
mat retention clip installation
instructions supplied with the
clips.

●

Check that the floor mat is securely
fixed in the correct place with all the
provided retaining hooks (clips). Be
especially careful to perform this check
after cleaning the floor.

●

With the engine stopped and the shift
lever in P (automatic transmission) or N
(manual transmission), fully depress
each pedal to the floor to make sure it
does not interfere with the floor mat.

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Matrix 2012

KC HiLiTES C Series Wiring Diagram preview
C Series
Brand: KC HiLiTES Pages: 4
Honda HRM3000 User Manual preview
HRM3000
Brand: Honda Pages: 73
Lincoln 2015 MKS Owner'S Manual preview
2015 MKS
Brand: Lincoln Pages: 424
Volkswagen 1983 Camper Onwers Manual preview
1983 Camper
Brand: Volkswagen Pages: 26
Alpine eX-10 Owner'S Manual preview
eX-10
Brand: Alpine Pages: 69
Allen Sports S302 Instructions preview
S302
Brand: Allen Sports Pages: 2
Whispbar K607W Fitting Instructions Manual preview
K607W
Brand: Whispbar Pages: 14
CTEK D250S Dual Manual preview
D250S Dual
Brand: CTEK Pages: 84
Dodge 2005 JR41 Stratus Owner'S Manual preview
2005 JR41 Stratus
Brand: Dodge Pages: 293
Safe Fleet Prime Design VBI-FT31B Assembly Instructions Manual preview
Prime Design VBI-FT31B
Brand: Safe Fleet Pages: 12
Saab 2000 9-5 2.3 Turbo Ecopower Owner'S Manual preview
2000 9-5 2.3 Turbo Ecopower
Brand: Saab Pages: 256
Bracketron Multi Vehicle Mount MVM-35-05 Installation Manual preview
Multi Vehicle Mount MVM-35-05
Brand: Bracketron Pages: 4
Seat Toledo 2019 Owner'S Manual preview
Toledo 2019
Brand: Seat Pages: 300
Adaptiv Mini CAM-MB6-AD User Manual preview
CAM-MB6-AD
Brand: Adaptiv Mini Pages: 4
Menabo SHADOW CADDY Fitting Instructions Manual preview
SHADOW CADDY
Brand: Menabo Pages: 12
PEUGEOT 208 T16 User Manual preview
208 T16
Brand: PEUGEOT Pages: 67
HAKR HV 1191 Instructions For Use Manual preview
HV 1191
Brand: HAKR Pages: 10
Kuda-Phonebase 296570 Installation Instruction preview
296570
Brand: Kuda-Phonebase Pages: 6

Brands by name

Popular brands

Load more brands