manualshive.com logo in svg

Toyota Matrix 2012, Owner'S Manual, Page: 334 / 481

Share
Download
Toyota Matrix 2012 Owner'S Manual Download Page 334

353

4-3. Do-it-yourself maintenance

4

Mainten

ance an

d ca

re

Engine oil

With the engine at operating temperature and turned off, check the oil
level on the dipstick.

■

Checking the engine oil

Park the vehicle on level ground. After warming up the engine
and turning it off, wait more than 5 minutes for the oil to drain
back into the bottom of the engine.

Hold a rag under the end and
pull the dipstick out.

Wipe the dipstick clean.

Reinsert the dipstick fully.

Holding a rag under the end, pull the dipstick out and check
the oil level.

Wipe the dipstick and reinsert it fully.

1.8 L 4-cylinder (2ZR-FE) engine

Low

Full

STEP

1

STEP

2

STEP

3

STEP

4

STEP

5

STEP

6

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Reviews:

No comments