manualshive.com logo in svg

Toyota Matrix 2012, Owner'S Manual, Page: 185 / 481

Share
Download
Toyota Matrix 2012 Owner'S Manual Download Page 185

203

3-2. Using the audio system

3

Inte

rior fe

atures

Contact the XM

®

 Listener Care Center at 1-800-967-2346 (U.S.A.) or 1-877-

438-9677 (Canada).

■

Certifications for the radio tuner

This device complies with Part 15 of the FCC Rules and RSS-210 Rules.
Operation is subject to the following two conditions; (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

CAUTION

■

FCC WARNING

Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.

NOTICE

■

To prevent damage, remove the antenna in the following cases.

●

The antenna will touch the ceiling of a garage.

●

A cover will be put on the roof.

---

or

CHANNEL NOT 

AVAILABLE

The channel you selected is no longer available. 
Wait for about 2 seconds until the radio returns to 
the previous channel or “CH001”. If it does not 
change automatically, select another channel.

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Reviews:

No comments