Toyota Matrix 2012 Owner'S Manual Download Page 18

Page: 18 / 481

1-2. Opening, closing and locking the doors

Before driving

Automatic door locking and unlocking systems (vehicles with
power door lock system)

The following functions can be set or cancelled:

: Vehicles with an automatic transmission only

The shift position linked door locking function works when all doors
are closed.

Function

Operation

Shift position linked
door locking function

Shifting the shift lever out of P locks all
doors.

Shift position linked
door unlocking func-
tion

Shifting the shift lever to P unlocks all doors.

Driver's door linked door
unlocking function

All doors are unlocked when the driver's door
is opened within 10 seconds after turning the
engine switch to “ACC” or “LOCK”.

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands

Toyota Matrix 2012, Owner'S Manual

Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands