Toyota Matrix 2012 Owner'S Manual Download Page 188

Page: 188 / 481

206

3-2. Using the audio system

Selecting a CD (with a CD changer)

■

Selecting a CD to play

Press

■

Scanning loaded CDs

Press and hold

until you hear a beep.

The first ten seconds of the first track on each CD will be played.

To cancel, press

again.

Press

again when the desired CD is reached.

Playing and pausing tracks (type B only)

Press .

Repeat play

■

Repeating a track

Press

(RPT) or

(RPT).

To cancel, press the button once more (without a CD changer), or twice
more (with a CD changer).

■

Repeating all of the tracks on a CD (with a CD changer)

Type A

Press and hold

(RPT) until you hear a beep.

To cancel, press the button again.

Type B

Press

(RPT) twice.

To cancel, press the button again.

STEP

Summary of Contents for Matrix 2012


































































































































































































































































































































































































































































































Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands

Toyota Matrix 2012, Owner'S Manual

Search results

Summary of Contents for Matrix 2012

Reviews:

Related manuals for Matrix 2012

Brands by name

Popular brands