Toshiba GD-1221, Operator'S Manual

Page: 39 / 264

About Originals 37
About Originals
Original size/Original scanning range
Original size
The following table shows the size and thickness of originals that can be transmitted via this sys-
tem.
*1 "Special media types" refers to special paper which is not acceptable for the Reversing Automatic Docu-
ment Feeder (optional) / Automatic Document Feeder (optional), such as overhead transparencies or
tracing paper.
Original scanning area
The complete area of the originals described above (other than B5, B4, and COMP) is scanned.
However, some remote FAXes cannot print the scanned area completely due to its ability. The
area to be scanned on B5, B4, and COMP originals is shown in the figure below.
Setting
Position
Original Type Original Size
Maximum
Number that
Can be Set
Remarks
Original
Glass Plain paper
Special media types
*1
3-dimensional objects
Book
Letter format: LD, LG, LT,
LT-R, ST-R
A/B format: A3, A4, A4-R,
A5-R, B4, B5, B5-R (*ST/
A5 is not available.) Do not place any
heavy object (8.8
lb. or 4 kg or over)
on the glass.
Automatic
Document
Feeder
(Optional) Plain paper Letter format: LD, LG, LT,
LT-R, ST-R, COMP
A/B format: A3, A4, A4-R,
A5-R, B4, B5, B5-R,
FOLIO (*ST/A5 is not
available.) 100 originals(50
to127g/m
2
) or
stacked height of
originals 16 mm
or less
Some of the origi-
nals on the left
may not be used
depending on
paper quality.
Reversing
Automatic
Document
Feeder
(Optional) Plain paper Letter format: LD, LG, LT,
LT-R, ST-R, COMP
A/B format: A3, A4, A4-R,
A5-R, B4, B5, B5-R,
FOLIO (*ST/A5 is not
available.) 100 originals
(50 to127g/m
2
) or
stacked height of
originals 16 mm
or less
Some of the origi-
nals on the left
may not be used
depending on
paper quality.
COMP
1 mm
(0.04 inch)
0.5 mm
(0.02 inch)
0.5 mm
(0.02 inch)
B5, B4
Original
Original
1 mm
(0.04 inch)