Toshiba GD-1221 Operator'S Manual Download

Page: 141 / 264

Polling Communications 139

Press the [FAX] button on
the control panel.

Press the

key.

"POLLING" screen appears.

Select “1. POLLING” using
the

button and

press the [ENTER] button.

When the security code is
used, select “1. YES” using
the

button and

press the [ENTER] button.

When not used, select "2. NO"
using the

button.

→

go to step 6.

Enter the security code (4
digits) with the digital keys
and press the [ENTER] but-
ton.

To correct the entered security
code, highlight the code using
the

button and enter the

correct code.

Specify the remote Fax.

P.47 “Keypad Dialing (Direct

Entry with Digital Keys)”

P.48 “One Touch Key Dialing”

P.50 “Abbreviated Dialing”

P.51 “Alphabet Dialing”

Transmission starts.

POLLING

1.POLLING

2.POLLING RESERVE

3.PROG. CONT. POLL.

POLLING

1.POLLING

2.POLLING RESERVE

3.PROG. CONT. POLL.

POLLING
SECURITY CODE?

1.YES

2.NO

POLLING
SECURITY CODE?

***

POLLING
ENTER TEL NUMBER OR,
PRESS SPEED DIAL KEY

OR ONE TOUCH KEY

POLLING
JOB NUMBER :026

Operation completed

Summary of Contents for GD-1221









































































































































































































































































Search results

Summary of Contents for GD-1221

Reviews:

Related manuals for GD-1221

Brands by name

Popular brands

Toshiba GD-1221, Operator'S Manual

Search results

Summary of Contents for GD-1221

Reviews:

Related manuals for GD-1221

Brands by name

Popular brands