Toshiba GD-1221 Operator'S Manual Download

Page: 42 / 264

2 BASIC FUNCTIONS

40 About Originals

Precautions for using the Automatic Document Feeder
(optional) or Reversing Automatic Document Feeder
(optional)

Do not use the following types of originals as they tend to be misfeed or become damaged:

Also, the following originals should be handled carefully:

(1) Badly wrinkled or folded originals. In

particular, originals whose leading edge
are curled may fail to be fed.

(4) Clipped or stapled originals

(2) Originals with carbon paper

(5) Originals with holes or torn originals

(3) Taped, pasted or clipped (cut out)

originals

(6) Damp originals (7) OHP film originals

(1) Folded or curled

originals should be
smoothed out before
being used.

(3) Originals sticking to each other, or originals that are

surface-treated may fail to separate properly.

(2) Originals with the

same width can be set
at a time. (Do not mix
originals with different
widths.)

Summary of Contents for GD-1221









































































































































































































































































Search results

Summary of Contents for GD-1221

Reviews:

Related manuals for GD-1221

Brands by name

Popular brands

Toshiba GD-1221, Operator'S Manual

Search results

Summary of Contents for GD-1221

Reviews:

Related manuals for GD-1221

Brands by name

Popular brands