Toshiba GD-1221, Operator'S Manual

Page: 43 / 264

About Originals 41
When using the Automatic Document Feeder (optional) or
Reversing Automatic Document Feeder (optional)
When the originals are placed on the Automatic Document Feeder (optional) or Reversing Auto-
matic Document Feeder (optional), the uppermost page is the first to be scanned and sent.
When the Reversing Automatic Document Feeder (optional) is installed, you can scan
and send two-sided originals.
P.81 “Sending Two-sided Originals”
1
After aligning the edges of
originals, place them with
their face up and slide the
guides to the width of the
originals.
y LT/A4 size originals are rotated
90 degrees so that they are sent
as LT-R/A4-R originals during
memory transmissions. They will
be reduced 50% and transmitted
as ST/A5 originals during on-
hook and off-hook transmis-
sions.
y You can mix different sizes of
originals, see
P.80 “MIX
ORIG-LENGTH”.
y If an original other than LT/A4
size is placed, the pre-entered
sender information will be
printed in the area shown A in
the figure when the original is
sent to the remote fax.
y To enter the sender information,
see
P.204 “Registering the
Terminal ID”.
y If a LT/A4 original is placed as
shown in the figure on the right,
the pre-entered sender informa-
tion will be printed in the area
shown B in the figure when the
original is sent to the remote fax.
A
B