Toshiba GD-1221, Operator'S Manual

Page: 147 / 264

Polling Communications 145
When this function has been
already set, the screen on the
right appears when you select “1.
CLEAR CURRENT SETTINGS”.
To cancel this setting, select “1.
YES” using the
or but-
ton, and then press the [ENTER]
button.
- When you clear the set-
ting, all the values for this
function returns to the
default values.
- To retain the setting, select
"2. NO" to return to the
basic screen.
5
Select the polling RX start
time using the
or
button and press the
[ENTER] button.
y To switch "AM" to "PM" or vice
versa, highlight the value using
the
button and press the
or button
y
"AM/PM" is not displayed on the
equipment with 24 hour time
system adopted.
y For minutes value, you can set it
at the unit of 5 minutes.
6
Select “3. END” using the
or button and press
the [ENTER] button.
7
Select a day-of-week to end
polling RX using the
or
button and press the
[ENTER] button.
y Since the end time is automati-
cally specified by entering the
start time and the duration, you
specify only the day-of-week in
this step.
PROG. CONT. POLL.
CLEAR CURRENT SETTINGS?
1.YES
2.NO
PROG. CONT. POLL.
Settings cleared.
PROG. CONT. POLL.
START DATE & TIME
PROG. CONT. POLL.
START DATE & TIME
PROG. CONT. POLL.
1.CLEAR CURRENT SETTINGS
3.END :FRI 05:00PM
MON 08 :00AM
MON 08:00 AM
2.START :MON 08:00AM
PROG. CONT. POLL.
2.START :MON 08:00AM
3.END :FRI 05:00PM
4.DURATION :7HR 20MIN
PROG. CONT. POLL.
END DATE
PROG. CONT. POLL.
2.START :MON 08:00AM
4.DURATION :7HR 20MIN
WED
3.END :WED 05:00PM