Toshiba GD-1221, Operator'S Manual

Page: 66 / 264

2 BASIC FUNCTIONS
64 Receiving a Fax
Receiving a fax manually
1
When the bell rings, pick up the handset of the external telephone.
y If the incoming call is a telephone call, start talking with the other party.
2
If you hear a tone (Fax signal), press the [FAX] button and the
[START] button.
4
Replace the handset of the external telephone.
Even when you press the [FAX] button during copying, the function mode cannot be
switched to the Fax mode. In this case, interrupt the copy operation and receive a Fax.
Relationship between Original and Paper
Acceptable size of paper
Originals received by Fax can be printed on LD, LG, LT, ST, COMP, A3, B4, A4, B5, A5 and
FOLIO size paper, and are printed in the printing range of each size of paper. No printing will
occur in the margins borders of the received originals as indicated by the gray borders on the
figures below.
y Set the paper in the drawers or the Paper Feed Pedestal (optional). A5-size paper can only
be set in the Paper Feed Pedestal.
y The paper set on the bypass tray is not available.
y A Fax-exclusive drawer can be set. See the following page for details.
P.70 “Setting a Fax drawer”
3
Select “2. RECEIVE” using
the
or button and
press the [ENTER] button.
y Receiving a Fax starts.
COMMUNICATING SETTING
2.RECEIVE
1.TRANSMIT
Printing area
Printing area
4 mm
3.5 mm
4 mm
3.5 mm
2.5 mm 2.5 mm 2.5 mm 2.5 mm
Output direction
Output direction