Toshiba GD-1221, Operator'S Manual

Page: 126 / 264

4 SYSTEM FUNCTIONS
124 Mailbox Communication
4
Select the desired mailbox
type using the
or
button and press the
[ENTER] button.
[1. CONFIDENTIAL]:
If a new data is input in this box
under the same box number where
another data exists, the new data
will be added to the existing data.
[2. BULLETIN BOARD]:
If a new data is input in this box
under the same box number where
another data exists, the new data
will overwrite the existing data.
[3. RELAY]/[4. MAILBOX SETUP]:
Not used in this operation.
5
Select “4. INPUT TO MAIL-
BOX” using the
or
button and press the
[ENTER] button.
6
Enter the desired mailbox
number (up to 20 digits)
with the digital keys and
press the [ENTER] button.
y If you make a mistake, press one of the following keys to correct the mistake. For
key locations of [BACKSPACE], [DELETE] and [INSERT], see the following
page.
P.29 “Keyboard”
[CLEAR/STOP] key:
Pressing this key clears all of the values that you entered.
[BACKSPACE] key:
Each press of this key deletes the values that you are entering one by one.
[DELETE] key:
Pressing this key after highlighting the value with the key deletes the value.
[INSERT] key:
Pressing this key permits the insertion of a desired character before (in front of)
an existing character highlighted by the cursor. Press this key again to exit the
Insert mode.
y If the selected mailbox has not
been set, the screen on the right
appears for about 2 seconds and
returns to the screen to enter a
mailbox number.
y For creating a mailbox, see the
following page.
P.112 “Setting up mailbox for
confidential and bulletin board
communication”
CONFIDENTIAL
1.PRINT MAILBOX
2.TX TO MAILBOX
3.POLL FROM MAILBOX
MAILBOX
1.CONFIDENTIAL
2.BULLETIN BOARD
3.RELAY
CONFIDENTIAL
2.TX TO MAILBOX
3.POLL FROM MAILBOX
4.INPUT TO MAILBOX
INPUT(CONFIDENTIAL)
MAILBOX NUMBER(MAX20):
INPUT (CONFIDENTIAL)
No entry