Toshiba GD-1221, Operator'S Manual

Page: 58 / 264

2 BASIC FUNCTIONS
56 Specifying the Remote Fax
- If there is not enough residual memory, a Memory Full status may occur.
When this status occurs, the scanned document data is cleared (default setting). Press-
ing the [FUNCTION CLEAR] button returns to the basic screen.
- Documents can no longer be added to memory if it becomes full midway during scan-
ning. In this case, reduce the number of originals you are sending, or try sending in the
direct transmission mode.
y "Send after Scan" function to transmit originals after scanning all of them is also available.
y For scan data handling when a Memory Full status occurs, you can set the desired method
on "13. SEND AFTER SCAN" in the Fax Setup menu. (
P.190 “Send after scan”)
1
Press the [FAX] button on the control panel.
2
Place the original(s) and set the transmission conditions.
y P.38 “When setting originals on the glass”
y P.41 “When using the Automatic Document Feeder (optional) or Reversing Auto-
matic Document Feeder (optional)”
y P.42 “Setting the Transmission Conditions”
3
Specify the remote Fax.
y P.47 “Keypad Dialing (Direct Entry with Digital Keys)”
y P.48 “One Touch Key Dialing”
y P.50 “Abbreviated Dialing”
y P.51 “Alphabet Dialing”
y P.53 “Group Dialing”
4
Press the [START] button
on the control panel.
y The equipment starts scanning
and storing the document into
memory.
y
To cancel memory transmission,
see
P.74 “Canceling Trans-
missions”.
y
The screen on the right may
appear when the equipment has
failed to detect the original size.
In this case, re-place the origi-
nal, or select the original size
using the
or button and
press the [ENTER] button.
SCANNING TO MEMORY
JOB NUMBER
:008
:001
:099%
SCANNING PAGE
RESIDUAL MEMORY
ENTER TEL NUMBER(MAX128):
2006-04-10 12:43
M: 100%
COMM.OPTION
RESOLUTION:STANDARD
Select original size
2.LD
3.LT-R
1.LT