manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 97 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 97

Designation Sheet 1 - 9

The destination sheet 1 - 9 can be specified.

Cover Sheet Tray

You can select [On] or [Off].
The default setting is [Off].

Back Cover Sheet Tray

You can select [On] or [Off].
The default setting is [Off].

Interposer Upper and Lower Tray (with the optional Cover Interposer Tray Type

GB5000)

Paper Size

You can select the size of the paper loaded in the Interposer Upper and Lower Tray.
This menu appears only when the optional Cover Interposer Tray is installed.
The paper sizes you can set for Interposer Upper and Lower Tray are as follows:

• [Auto Detect]
• 13×19

1

/

5

, 13×19 , 13×18 , 12

3

/

5

×19

1

/

5

, 12

3

/

5

×18

1

/

2

, 12×18 ,

11×17 , 11×15 , A3 , B4 JIS , SRA3 , 310×432 mm , 8K

• [Custom Size]

You can specify a custom size of between 10.12 - 13.0 inches (257.0 - 330.2 mm) vertically, and
between 14.34 - 19.2 inches (364.0 - 487.7 mm) horizontally.
The default setting is Auto Detect.

• For details about paper sizes that can be automatically detected, see "Recommended Paper

Sizes and Types", About This Machine.

Items of Tray Paper Settings

95

2

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments