manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 172 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 172

• File Storage Memory Full Soon
• Log Error
• Device Access Violation
• Replacement Required: Unit
• Replacement Required Soon: Unit
• Out of Binding Ring Combs
• Out of Binding Glue
• Waste Paper Receptacle is Full
• Binder Tray Error

1.

Log on to Web Image Monitor in administrator mode.

2.

In the menu area, click [Configuration].

3.

Click [E-mail] on the [Device Settings] area.

4.

Make the following settings:

• Items in the Reception column: Make the necessary settings for sending and receiving e-mail.
• Items in the SMTP column: Configure the SMTP server. Check your mailing environment, and

then specify the necessary items. You can also perform mail authentication for the SMTP server.

• Items in the POP before SMTP column: Configure the POP server. Check your mailing

environment, and then specify the necessary items. You can also perform mail authentication for
the POP server.

• Items in the POP3/IMAP4 column: Configure the POP3 or IMAP4 server. Check your mailing

environment, and then specify the necessary items.

• Items in the E-mail Communication Port column: Configure the port to be used for access to the

mail server.

• Items in the E-mail Notification Account column: Specify these items If you want to use e-mail

notification.

5.

Click [OK].

6.

Click [Logout].

7.

Quit Web Image Monitor.

• For details about login user name and password, see Security Reference, which is the administrator's

manual.

• For details about the settings, see Web Image Monitor Help on the supplied CD-ROM.
• For details about Web Image Monitor, see “Using Web Image Monitor”.

5. Monitoring and Configuring the Printer

170

5

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments