manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 106 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 106

3.

Connect the Ethernet interface cable to the Gigabit Ethernet port.

CCJ003

4.

Connect the other end of the Ethernet interface cable to a network connection device such
as a hub.

5.

Turn on the main power switch of the machine.

BRV036S

1. Indicator (green)

When 10BASE-T is operating, the LED is lit green. When 100BASE-TX is operating it is turned off.

2. Indicator (yellow)

When 100BASE-TX is operating, the LED is lit yellow. When 10BASE-T is operating, it is turned off.

3. Indicators (both green and yellow)

When 1000BASE-T is operating, both LED are lit.

• For details about how to turn on the main power switch, see "Turning On the Main Power", About

This Machine.

• For details about installing the printer driver, see "Preparing the Machine", Printer Reference.

Connecting to the USB Interface

This section describes how to connect the USB2.0 interface cable to the USB2.0 port.

3. Connecting the Machine

104

3

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments