manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 314 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 314

The default setting is "0" mm.

• Tray 3 (Back Side)

• Max.: 2.0 mm
• Min.: -2.0 mm
• Step: 0.1 mm

The default setting is "0" mm.

• Tray 4 (Back Side)

• Max.: 2.0 mm
• Min.: -2.0 mm
• Step: 0.1 mm

The default setting is "0" mm.

• Tray 5 (Back Side)

• Max.: 2.0 mm
• Min.: -2.0 mm
• Step: 0.1 mm

The default setting is "0" mm.

• Tray 6 (Back Side)

• Max.: 2.0 mm
• Min.: -2.0 mm
• Step: 0.1 mm

The default setting is "0" mm.

• Tray 7 (Back Side)

• Max.: 2.0 mm
• Min.: -2.0 mm
• Step: 0.1 mm

The default setting is "0" mm.

• If sheets are delivered face down, turn them over horizontally and check the image position.
• You can also use Frame Image to adjust image position: under [Select Test Pattern for image Position

Adjustment], select [Frame Image].

0102: Adjust Image Position With Feed Direction

Adjust the vertical position of the printed image. Press [+] or [-] to move the image feed direction or
reverse feed direction.

8. Appendix

312

8

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments