manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 278 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 278

1.

Press [FTP] or [NCP].

A confirmation message appears.

2.

Press [Yes].

Changing the protocol will clear all settings made under the previous protocol.

3.

Enter each item again.

Deleting a SMB Registered Folder

This section describes how to delete the registered SMB folder.

1.

Press the [User Tools] key.

2.

Press [System Settings].

3.

Press [Administrator Tools].

4.

Press [Address Book Management].

5.

Check that [Program / Change] is selected.

6.

Select the name whose folder you want to delete.

Press the name key, or enter the registered number using the number keys.
You can search by the registered name, folder name, and e-mail address.

7.

Press [Folder].

6. Registering Addresses and Users for Scanner Functions

276

6

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments